64 95 142 D3632
40
D3632
.
031.01.02
.
02 03.2016
4 Delivery and transport
Sirona Dental Systems GmbH
4.3 Transport to the installation site
Installation Manual ORTHOPHOS SL
4.3.1.2
Transport without pallet (exception)
If the pallet is too wide for transport to the installation site, you may
unscrew the pallet from the wooden support (A) and transport the unit by
means of the wooden supports without the pallet.
1. Remove the surrounding packaging.
2. Take the remote control (if supplied) out of the center styrofoam
packaging and store everything in a safe place.
3. Remove the two lateral styrofoam packaging parts.
4. Loosen the four screws (B).
5. Pull the carrying handles (C) out of their holders and insert them
through the drillings (D) of the wooden support (A) from the inside.
6. Insert screws (B) through drillings (E) and into the drillings of the
carrying handles to attach them firmly. The handles can be made
short or long.
The carrying handles have rims which prevent them from slipping out
of the holes.
NOTICE
Possible transport damage
Leave the center styrofoam packaging attached to the unit for
protection.
If this is not possible, secure the position of the tube assembly prior to
further transport.
➢ Secure the position of the tube assembly using the strap provided
(see label on the styrofoam packaging).
➢ Tighten the strap only gently. Do not tension the strap.
C
E
Summary of Contents for ORTHOPHOS SL 2D
Page 2: ......
