64 95 142 D3632
14
D3632
.
031.01.02
.
02 03.2016
2 Safety instructions
Sirona Dental Systems GmbH
2.9 Modifications to the unit
Installation Manual ORTHOPHOS SL
2.9
Modifications to the unit
Modifications to this unit which might affect the safety of the system
owner, patients or other persons are prohibited by law!
For reasons of product safety, this product may be operated only with
original Sirona accessories or third-party accessories expressly approved
by Sirona. The user is responsible for any damage resulting from the use
of non-approved accessories.
2.10
Transport safety devices
Transport safety devices
2.11
Electromagnetic compatibility
The unit complies with the requirements of standard IEC 60601-1-2.
Medical electrical equipment is subject to special EMC-related
precautions. It must be installed and operated as specified in the
document "Installation Requirements".
If high-voltage systems, radio link systems or MRI systems are located
within 5 m of the unit, please observe the specifications stated in the
installation requirements.
Portable and mobile RF communications equipment may affect medical
electrical equipment. Therefore, the use of mobile wireless phones in
medical office or hospital environments must be prohibited.
2.12
Electrostatic discharge
Electrostatic discharge (abbreviated: ESD – ElectroStatic Discharge)
Electrostatic discharge from people can damage electronic components
when the components are touched.
Touch a ground point to discharge static electricity before touching any
boards.
IMPORTANT
The transport safety devices (marked in red) attached to the unit must
be removed prior to initial startup.
Summary of Contents for ORTHOPHOS SL 2D
Page 2: ......