SII IP-5520, User Manual

Page: 27 / 252

O
ve
rv
ie
w
1-3
1
Environmental conditions
¢
Operating temperature and humidity ranges
The printer should be used within the temperature and humidity ranges shown
below.
Temperature : 15 °C to 30 °C (60 °F to 86 °F)
Humidity : 30% to 70%
¯
To obtain better print quality, use the printer within temperatures of 20 to
25 °C (68 °F to 77 °F.)
¯
To keep a stable and good print quality, the printer slows down the print
speed when the operating temperatures exceeds 41 °C (106°F).
Note
- When the printer is used out of the operating temperature and humidity
ranges, the print quality may be degraded and/or print may be stopped.
- It takes time for the printer to adapt to the operating environment temperature
and humidity. To get good printed image quality, it is recommended to keep the
room temperature 20 to 25°C , 68 to 77°F and use the printer after at least 1 hour.
¢
Places where the printer must not be installed
Do not install the printer in the following places:
¯
Places exposed to direct sunlight
¯
Places subject to vibration
¯
Places with excessive dust
¯
Places subject to extreme changes in temperature or humidity
¯
Places near an air conditioner or a heater
¯
Places where the printer may get wet
¯
Places subject to direct air circulation from vents
¯
Places near a diazo copier that may generate ammonia gas
¯
Places with poor ventilation
¯
Unstable places