SII IP-5520 User Manual Download Page 14

Page: 14 / 252

viii

Manual legend (Notational rules)

The notations used for text and keys / LCD in this guide are as follows.

Notations

WARNING

- Boxes marked with a "WARNING" describe points of caution for avoiding

serious personal injury.

CAUTION

- Boxes marked with a "CAUTION" describe points of caution for avoiding

injury to yourself or damage to the printer.

Note

- They explain the important items and cautions that should be kept in mind

when operating the printer. To avoid troubles to the printer or prevent dam-
ages or wrong operation, be sure to read them.

Hint mark

The hint symbol describes operations that make using or handling the

printer easier.

Reference mark

This mark is followed by a reference section or page number.

Summary of Contents for IP-5520





























































































































































































































































Search results

Summary of Contents for IP-5520

Reviews:

Related manuals for IP-5520

Brands by name

Popular brands

SII IP-5520, User Manual

Search results

Summary of Contents for IP-5520

Reviews:

Related manuals for IP-5520

Brands by name

Popular brands