SII IP-5520 User Manual Download Page 171

Page: 171 / 252

ain

e a

nd A
dju

stm

t / R
ep

4-17

Clean the head guard

When dirt on the head guard contacts the media, and black lines appears on the
print, clean the head guard using the following procedure.

Set the printer to offline. Press

key

to display PH.MAIN MENU.

Press

key to enter the PH.MAIN MENU.

The cap cleaning menu is displayed.

Select [RESEAT PRINTHEAD] with

key and then press key.

When the confirmation menu appears,

press

key.

The carriage moves.

Open the front cover and then the

maintenance cover.

REWIND

FORM FEED

PH.REC

PH.MAIN

#CAP CLEANING
>

#RESEAT PRINTHEAD
>

#RESEAT PRINTHEAD

OK ?

CARRIAGE MOVING
PLEASE WAIT

OPEN COVER
RESEAT PRINTHEAD

Periodic Maintenance

Summary of Contents for IP-5520





























































































































































































































































Search results

Summary of Contents for IP-5520

Reviews:

Related manuals for IP-5520

Brands by name

Popular brands

SII IP-5520, User Manual

Search results

Summary of Contents for IP-5520

Reviews:

Related manuals for IP-5520

Brands by name

Popular brands