SII IP-5520, User Manual

Page: 186 / 252

4-32
Head position adjustment
Print the pattern for adjusting the print position of each print head and enter the
correction value.
(2) Adjustment of the print position in the right and left directions
When replacing the media with a new media
(1) Adjustment of bidirection position (P.4-34 Bidirectional adjustment method)
To get a good printed image quality (normally, the adjustment is not necessary.)
(1) Adjustment of the print position in vertical directions
Print the adjustment pattern
[AUTO/MANUAL BIDIR ADJUST]
.
Based on the result of the adjustment pattern print,
enter the value in
[BIDIR ADJ L] or [BIDIR ADJ R].
(2) Adjustment of media advance value (P.4-28 [Media advance value setting])
Print the adjustment pattern
[SING./MULTI ADV] .
Based on the result of the adjustment pattern
print, enter the value in
[MEDIA ADV VALUE] .
Print the adjustment pattern
[NOZZLE POS ADJ].
Based on the result of the adjustment pattern print,
enter the value in
[NOZZLE POS VAL]
.
Print the adjustment pattern
[PRINT HEAD ADJUST].
Based on the result of the adjustment pattern print,
enter the value in
[POS ADJ]
.
Based on the result of the adjustment pattern print,
enter the value in
[R/L ADJ]
.
(3) Adjust the position of the picture being printed on the media (only when the head (K)
is replaced)
Print the adjustment pattern
[EDGE SENSOR ADJUST].
Based on the result of the adjustment pattern print,
enter the value in
[TOP ADJ] and [SIDE ADJ] .