SII IP-5520, User Manual

Page: 60 / 252

2-12
15
Enter the remaining length of media.
Enter the remaining length of roll media
loaded to the printer.(
P.3-18 [MEDIA
MENU]
)
16
The media set operation automatically
starts.
- When successfully finished, the printer returns to the online state or offline state.
- If an error occurs, an error message is displayed. Go back to step
1
and start
the procedure again.
Note
- After installing the media, check that the media does not enter in the gap of the
media cutter blade or is not pinched by the media clip. Also make sure the media
on the platen has no curl or wrinkles.
To register a new media
14
Select the type of media.
Select the type of media registered
with the
and keys and press
the key. (
P.3-20 [MEDIA
REG MENU]
)
REMAINING MEDIA
*XXXm
PREPARING MEDIA
PLEASE WAIT
[NEW MEDIA ENTRY] is displayed at the
end of media registration. Press the
key to enter [MEDIA REG MENU]. The
media registration procedure is the same
as the registration from the registration
menu. (
P.3-20 [MEDIA REG MENU]
)
Press key to return from the media
registration menu to the media type
selection menu. To return to the value
before input, press the
key.
SELEC T MEDIA
MEDIA:XXX
SELEC T MEDIA
MEDIA:PAPER
SELEC T MEDIA
NEW MEDIA ENTRY
The registered media is displayed.
(Enter in the registration
menu.)
SELEC T MEDIA
MEDIA:XXX
SELEC T MEDIA
MEDIA:PAPER