SII IP-5520 User Manual Download

Page: 172 / 252

4-18

Dip the cleaning swab in the cap cleaning liquid and remove the dirt on the

right and left head guards of the carriage. Visually check the result and leave

it for few minutes.

Note

- Do not dip a cleaning roller swab once used in the cap cleaning liquid bottle.

The cap cleaning liquid will get dirty.

Wipe out stains with a soft cloth.

After finishing the cleaning, close the
maintenance cover and the front cover.
The carriage automatically returns to its
original position.

Note

- Do not expose the print heads for an unnecessarily long time when

taking them out of the capping unit. The print heads may dry and cause
malfunction.

Head guard

Cleaning swab

Soft cloth

Summary of Contents for IP-5520





























































































































































































































































Search results

Summary of Contents for IP-5520

Reviews:

Related manuals for IP-5520

Brands by name

Popular brands

SII IP-5520, User Manual

Search results

Summary of Contents for IP-5520

Reviews:

Related manuals for IP-5520

Brands by name

Popular brands