2-23
2
Ba
sic O
pe
ra
tio
n
Margin
Set the origin
NEST ORIGIN SET TING
*OK ?
How to use the origin setting function
<Origin setting function>
When a small image is printed on, for example, a “64” width media, a large margin
is created as shown below.
By returning the printed media and re-setting the origin of print start, another
image may be printed in this margin. Re-setting the origin of print is called [Origin
setting function].
<Procedure to use the origin setting function>
1
Return the media by operating [Back Feed].
(
P.2-22 Rewind the media [Back Feed]
)
Note
- Return the media only after the printed image completely dries. The first printed
image will be damaged if this function is used before it is sufficiently dry.
2
Press and hold the
key for 1.5 seconds
in the online state (idle mode) to move
the carriage and enable the origin setting.
Align the [] label on the carriage front with the
origin.
(First print)
(Return of media)
(Second print)
[ ]
Label
Summary of Contents for IP-5520
