SII IP-5520 User Manual Download Page 150

Page: 150 / 252

3-58

(3)

Length Unit

Select the displayed length unit for various
parameters.

MILLIMETER

This displays in the meter unit system of mm (millimeter) or m
(meter).

INCH

This displays in the inch unit system of “ (inch) or ft (feet).

(4)

Temperature Unit

Select the temperature unit.

CENTIGRADE

Displays the temperature in centigrade.

FAHRENHEIT

Displays the temperature in fahrenheit.

(5)

BEEP

This function sets whether or not the warning
beep sounds in the condition below.

- When the print heads are outside the cap during daily

maintenance or height adjustment.

- Print heads cannot be capped due to media jam dur-

ing printing.

- When confirming the print heads are checked.
- When the nest (origin) is being set.

The beep sounds.

OFF

The beep does not sound.*

* Regardless of this setting, the beep sounds when a normal error occurs.

#TEMPERATURE UNITS
>CENTIGRADE

#LENGTH UNITS
>MILLIMETER

#BEEP
>ON

Summary of Contents for IP-5520





























































































































































































































































Search results

Summary of Contents for IP-5520

Reviews:

Related manuals for IP-5520

Brands by name

Popular brands

SII IP-5520, User Manual

Search results

Summary of Contents for IP-5520

Reviews:

Related manuals for IP-5520

Brands by name

Popular brands