SII IP-5520 User Manual Download Page 157

Page: 157 / 252

ain

e a

nd A
dju

stm

t / R
ep

4-3

Regular Inspection / Maintenance (Daily maintenance)

To keep the print quality stable, perform regularly the following 6 maintenance items.

(1) Check the waste ink bottle

: everyday

(2) Check the wiper cleaning liquid

: everyday

(3) Check stains on the wiper blade

: everyday

(4) Clean the capping unit

: every week

(5) Execute the head cleaning [normal]

: every week

(6) Execute a nozzle print

: everyday

Note

- Perform the maintenance tasks mentioned above within the indicated

period.

- Only use the cleaning liquid, cleaning stick, cleaning roller and cleaning

swab specified by Seiko I Infotech.

(1) Check the waste ink bottle

Check that the waste ink bottle is not full.
When the waste ink is filled to the [FULL]
label, replace the waste ink bottle with a
new (empty) one.(

P.2-40[Waste ink bottle

replacement]

)

(2) Check the remaining wiper cleaning liquid

Open the front cover and the cap cover and
visually check the remaining wiper cleaning
liquid. If the wiper cleaning liquid is empty,
replace it.
(

P.4-23[Wiper cleaning liquid replacement]

)

The wiper cleaning liquid needs replacement
about once a month as a general rule.

Note

- The wiper cleaning liquid may get dirty. This is normal.

Summary of Contents for IP-5520





























































































































































































































































Search results

Summary of Contents for IP-5520

Reviews:

Related manuals for IP-5520

Brands by name

Popular brands

SII IP-5520, User Manual

Search results

Summary of Contents for IP-5520

Reviews:

Related manuals for IP-5520

Brands by name

Popular brands