SII IP-5520 User Manual Download Page 185

Page: 185 / 252

ain

e a

nd A
dju

stm

t / R
ep

4-31

Change during online printing

During online printing, the media advance value can be changed using the
following procedure.

PRINTER READY
ROLL:1625/PAPER

PRINTING
NORMAL L ND BI

MEDIA ADV100.00%

100.00%

Press

key or

key .

Start of print data reception
The data LED

blinks.

Online state (idle mode) display

- By pressing

key or

key during printing, the currently used media advance value

is displayed. (Second row on the display)

- The value at the beginning of printing is displayed on the first row on the display and

remains unchanged until printing is finished.

- The value increases or decreases by 0.01 % when pressing

keys.

-  When the value is changed, it is reflected on printing immediately.
-  If no key is operated for 3 seconds, the display returns to the original display.
-  Since the changed media advance value is saved as a new value, it is also reflected on

the next print.

Summary of Contents for IP-5520





























































































































































































































































Search results

Summary of Contents for IP-5520

Reviews:

Related manuals for IP-5520

Brands by name

Popular brands

SII IP-5520, User Manual

Search results

Summary of Contents for IP-5520

Reviews:

Related manuals for IP-5520

Brands by name

Popular brands