SII IP-5520, User Manual

Page: 50 / 252

2-2
USB connector
Connection to a computer
This section describes the procedure to connect the printer to a computer.
System configuration (Connection example)
See below.
Connecting procedure
Connect the cable following the procedure below.
1
Turn off the power of the printer and computer to be connected.
Note
- When the printer and a computer are connected, turn on the power of the printer
first and turn off the power of printer last when powering them down.
2
Connect the specific cable to the USB connector at the rear of the printer.
Printer
Computer
USB interface
USB 2.0 cable (B type connector)
Note
- Use a USB 2.0 cable.
- When using a USB hub, use a product
that supports UBS 2.0.
- For the cable and hub used for USB
connection to the system, use USB-IF approved products. When connecting the
non-approved USB cable, hub and equipment, the printer may not function
properly.
- The maximum length of one cable is 5 m. If you desire to extend longer than 5 m,
use a hub. The maximum length configuration is 5 stage hub connection. If a cable
longer than 5 m is used or if the cables are merely connected, the printer may not
function properly.
- To protect the USB connector, clamp
the USB 2.0 cable to the printer
body.