manualshive.com logo in svg

Siemens SINAMICS S220, Equipment Manual, Page: 29 / 156

Share
Download
Siemens SINAMICS S220 Equipment Manual Download Page 29

Functions for higher efficiency
• Basic functions: Speed control, torque control, positioning functions

• Intelligent starting functions for independent restart after power supply interruption

• BICO technology with interconnection of drive-related I/Os for easy adaptation of the drive 

system to its operating environment

• Integrated safety functions for rational implementation of safety concepts

• Regulated infeed/regenerative feedback functions for preventing undesirable reactions on 

the supply, allowing recovery of braking energy and ensuring greater stability against line 
fluctuations.

DRIVE-CLiQ – the digital interface between SINAMICS components
Most of the components, including the motors and encoders, are connected to each other via 
the common DRIVE-CLiQ serial interface. The standardized cables and connectors reduce the 
variety of different parts and cut storage costs. Encoder evaluations for converting standard 
encoder signals to DRIVE-CLiQ are available for third-party motors or retrofit applications.

Electronic rating plates in all components
The electronic rating plates integrated in every component are an important part of the digital 
link of the drive system. They allow all drive components to be detected automatically via a 
DRIVE-CLiQ link. This means that data does not have to be manually entered while 
commissioning the system or when replacing parts.

The electronic rating plate contains all the relevant technical data about that particular 
component. For motors, these are the parameters of the electrical equivalent circuit diagram 
and key values of the integrated motor encoder, for example.

In addition to technical data, the rating plate also includes logistical data, such as the 
manufacturer ID, article number and identification number. Since this data can be called up 
electronically on site or remotely, all the components used in a machine can always be 
individually identified, which helps simplify servicing.

System overview

3.1 Platform Concept and Totally Integrated Automation

Booksize power units
Equipment Manual, 01/2022, 6SL3097-6AC30-0BP0

27

Summary of Contents for SINAMICS S220





























































































































































Reviews:

No comments