Siemens SINAMICS S220 Equipment Manual Download Page 22 | Manualshive

Page: 22 / 156

Siemens SINAMICS S220 Equipment Manual Download Page 22

WARNING

Unexpected movement of machines caused by inactive safety functions

Inactive or non-adapted safety functions can trigger unexpected machine movements that
may result in serious injury or death.
• Observe the information in the appropriate product documentation before commissioning.
• Carry out a safety inspection for functions relevant to safety on the entire system, including

all safety-related components.

• Ensure that the safety functions used in your drives and automation tasks are adjusted and

activated through appropriate parameterizing.

• Perform a function test.
• Only put your plant into live operation once you have guaranteed that the functions

relevant to safety are running correctly.

Note
Important safety notices for Safety Integrated functions

If you want to use Safety Integrated functions, you must observe the safety notices in the Safety
Integrated manuals.

Fundamental safety instructions
2.1 General safety instructions

Booksize power units

20

Equipment Manual, 01/2022, 6SL3097-6AC30-0BP0

«
...
20
21
22
23
24
...
»

Summary of Contents for SINAMICS S220





























































































































































Reviews:

No comments