A total of 12 logger files can therefore be stored. Text files can be viewed using Notepad for
example (Microsoft text editor for the Windows operating system) or similar text editors. The
binary file can only be opened using CeCOMM.
Note
Saving the logger file requires a write access to the memory card. Unnecessary write
operations should be avoided so as not to shorten the service life of the memory card.
Note
Transfer the stored logger files from the memory card to hard disk immediately.
This ensures that the stored files are not overwritten when the next save operation is performed
(save using logger menu of CeComm) or after the tenth save operation (save using "SAVE
LOGGER" bit).
Figure 8-43
View of a logger file as a text file
This is how logger files appear when they are stored as "Logger.txt":
SIMOCRANE CeCOMM commissioning and diagnostic program
8.9 Logger
SC integrated STS, GSU
310
Operating Instructions, 07/2019, A5E48271265B AA