Figure 5-37
Signal in the function block
The "FB_TargetsPLCToAddOn" function block copies word 1 (targets_io_piw[0]) to the
"b16_STW1" output and also separates it into bits. These are applied to the block outputs. The
bit separation has the following form:
bo_STW1_Learn_Park_Pos = 0
(control word 1, bit 0)
bo_STW1_Learn_Lash_Platf = 0
(control word 1, bit 1)
bo_STW1_Use_Lash_Platf = 1
(control word 1, bit 2)
bo_STW1_Stack_Form_Bit0 = 0
(control word 1, bit 3)
bo_STW1_Stack_Form_Bit1 = 1
(control word 1, bit 4)
bo_STW1_Cycling = 1
(control word 1, bit 5)
bo_STW1_Offset_To_Land = 1
(control word 1, bit 6)
bo_STW1_Offset_To_Water = 1
(control word 1, bit 7)
bo_STW1_Use_Extern_Targets = 1
(control word 1, bit 8)
Because the "b16_STW1" word at the block output is not interconnected any further, the
following bit variables are selected for tracing the signal:
● bo_STW1_Use_lash_Platf
● bo_STW1_Stack_Form_Bit0
● bo_STW1_Stack_Form_Bit1
Configuration
5.17 Communication tests for the STS application project
SC integrated STS, GSU
Operating Instructions, 07/2019, A5E48271265B AA
143