Siemens SICAM AK Manual Download Page 62

Page: 62 / 167

Redundancy via SCA-RS

Unrestricted

SICAM RTUs, SICAM AK Redundancy

Edition 10.2016, DC2-026-2.07

The following parameters are excluded from the copy operation

•

System-technical parameters:

─

The addressing of the redundant BSE

─

The setting, whether the BSE is an Original or an Image

─

Settings for the PREs of a BSE

─

Settings for priorities, refer to sections

1.2.3.3

Settings for PREs (CPU Redundancy)

and

1.2.3.4

, Settings for BSEs (CPU Redundancy)

•

Process-technical parameters:

─

All redundancy control messages

─

All redundancy status information messages

─

All error messages

─

All communication control messages

─

All PRE control messages

─

All PRE status information messages

All other parameters (CAEx

plus

application, data points of singular PEs, BSE settings,

selective data flow routing ...) are acquired by the mirroring.

This is how you mirror the parameters from the Original-BSE to the Image-BSE:

•

Select the first BSE of the redundancy pair (C4: CP-2017/PCCX25)

•

In the context menu select the entry

Copy mirror parameters

•

Select the second BSE of the redundancy pair (C5: CP-2017/PCCX25)

•

In the context menu select the entry

Paste mirror parameters

If the elements of the redundancy pair are configured differently (one is e.g. configured with
one PE and I/O-modules, the other not), the following message appears:

Click

OK.

Summary of Contents for SICAM AK








































































































































































Search results

Summary of Contents for SICAM AK

Reviews:

Related manuals for SICAM AK

Brands by name

Popular brands

Siemens SICAM AK, Manual

Search results

Summary of Contents for SICAM AK

Reviews:

Related manuals for SICAM AK

Brands by name

Popular brands