Siemens SICAM AK Manual Download Page 21

Page: 21 / 167

Redundancy via SCA-RS

SICAM RTUs, SICAM AK Redundancy

Unrestricted

DC2-026-2.07, Edition 10.2016

Example for AU redundancy with SCA-RS with application-related voting:

Global redundancy switchover: all SEs of an AU are switched active/passive.
Line-by-line redundancy switchover: the SEs of an AU are switched active/passive selectively.

The FUD runs for instance on both C-CPUs of the two AUs. The synchronization mode is

High

Speed Link (HSL)

, if CAEx

plus

is used on both redundancy BSEs.

1.1.6

Overview of Synchronization Modes

Please note, that the representations are merely examples.

The 3 modes defined apply both for CPU as well as AU redundancy.

Example for AU redundancy:

The FUD runs for instance on both C-CPUs of the two AUs. The synchronization mode is

High

Speed Link (HSL)

: if CAEx

plus

is used on both redundancy BSEs.

Summary of Contents for SICAM AK








































































































































































Search results

Summary of Contents for SICAM AK

Reviews:

Related manuals for SICAM AK

Brands by name

Popular brands

Siemens SICAM AK, Manual

Search results

Summary of Contents for SICAM AK

Reviews:

Related manuals for SICAM AK

Brands by name

Popular brands