Siemens SICAM AK Manual Download Page 73

Page: 73 / 167

Redundancy via SCA-RS

SICAM RTUs, SICAM AK Redundancy

Unrestricted

DC2-026-2.07, Edition 10.2016

1.5.2.3.2 Installing 2

Power Supply

The second power supply is installed in the upper left slot.

Therefore the CM-5680 connection p.c.b. and socket connector must be installed before. The
same parts as used for the first power supply have to be used.

Designation

Item-Number/MLFB

CM-5680 supply/signaling PS-562x

BC5-680

6MF10130FG800AA0

Installing Connection P.C.B. CM-5680

•

Open the screws of the plate that covers the slot for the second power supply

•

Install the plates on which connection p.c.b. and socket connector will be mounted

•

Screw the socket connector from inside the mounting rack to the plates

•

Screw the connection p.c.b. from the rear side of the mounting rack to the plates

RY
ER

SICAM

PS-5620

ESD

EARTH

FACILITY

2 power supply

1 power supply

CM-5680

Plate

Socket connector

Plate

CM-2833 rear side

Summary of Contents for SICAM AK








































































































































































Search results

Summary of Contents for SICAM AK

Reviews:

Related manuals for SICAM AK

Brands by name

Popular brands

Siemens SICAM AK, Manual

Search results

Summary of Contents for SICAM AK

Reviews:

Related manuals for SICAM AK

Brands by name

Popular brands