Siemens SICAM AK Manual Download Page 23

Page: 23 / 167

Redundancy via SCA-RS

SICAM RTUs, SICAM AK Redundancy

Unrestricted

DC2-026-2.07, Edition 10.2016

1.2

CPU-Redundancy (Redundant Basic System Elements)

The voting between both BSEs (between the redundant CPU pairs) is performed automatically
by the M-CPU (automatic voting with CPU redundancy).

You define the criteria for a voter switchover in the Redundancy Table (see also the
description of the Priority Levels in sections

1.2.3.2

ff.).

Connection between both BSEs over HSL

The High Speed Link (HSL) is used for the synchronization of both redundant BSEs
(C-CPUs).

For CPU redundancy the HSL-connections are installed permanently at the back of the
mounting rack corresponding to the predefined CPU pairs.

Predefined BSE pairs 1/2, 4/5, 7/8, in the mounting rack for 9 slots (CM-2834).

Predefined BSE pairs 1/2, 4/5, 7/8, 10/11, 13/14 in the mounting rack for 17 slots (CM-2836).

Summary of Contents for SICAM AK








































































































































































Search results

Summary of Contents for SICAM AK

Reviews:

Related manuals for SICAM AK

Brands by name

Popular brands

Siemens SICAM AK, Manual

Search results

Summary of Contents for SICAM AK

Reviews:

Related manuals for SICAM AK

Brands by name

Popular brands