Siemens SICAM AK Manual Download Page 84

Page: 84 / 167

Redundancy via SCA-RS

Unrestricted

SICAM RTUs, SICAM AK Redundancy

Edition 10.2016, DC2-026-2.07

With the help of these two modules, 24 analog values can be exchanged between the BSEs.

•

TB_RED_SET_PRIOR_INFO

System messages for the control of the priorities for the redundancy switchover by the
voter

With the help of this module priorities are defined, which concern that BSE on which the
CAEx

plus

application is running.

•

TB_RED_SET_SWITCH_DISABLE

Deactivation of the redundancy switchover

With the help of this module the redundancy switchover can be deactivated.

•

TB_RED_SET_UPDATE_REQUEST

Redundancy update request

With the help of this module an update is requested over HSL.

•

TB_RED_GET_SYSTEM_INFO

Readout of the redundancy states

With the help of this module one obtains information about whether that BSE on which the
CAEx

plus

application is running is in the active or passive state.

Summary of Contents for SICAM AK








































































































































































Search results

Summary of Contents for SICAM AK

Reviews:

Related manuals for SICAM AK

Brands by name

Popular brands

Siemens SICAM AK, Manual

Search results

Summary of Contents for SICAM AK

Reviews:

Related manuals for SICAM AK

Brands by name

Popular brands