Siemens SICAM AK Manual Download Page 64

Page: 64 / 167

Redundancy via SCA-RS

Unrestricted

SICAM RTUs, SICAM AK Redundancy

Edition 10.2016, DC2-026-2.07

1.5.2

Possible Configurations

Mounting Rack CM-2834

In the basic configuration the mounting rack is fitted with one
power supply.
This is installed in the upper slot.

The 2

power supply can be used either for increasing

performance or for redundancy.
This is installed in the lower slot.

Mounting Rack CM-2836

In the basic configuration the mounting rack is fitted with one
power supply.
This is installed in the upper right slot.

The 2

power supply can be used either for increasing

performance or for redundancy.
This is installed in the upper left slot.

The 3

power supply can be used solely as redundancy for the

first or second power supply.
It is installed in the lower right slot. This must be expanded with
CM-2826 beforehand.

The 4

power supply can be used solely as redundancy for the

first or second power supply.
It is installed in the lower left slot. This must be expanded with
CM-2826 beforehand.

Summary of Contents for SICAM AK








































































































































































Search results

Summary of Contents for SICAM AK

Reviews:

Related manuals for SICAM AK

Brands by name

Popular brands

Siemens SICAM AK, Manual

Search results

Summary of Contents for SICAM AK

Reviews:

Related manuals for SICAM AK

Brands by name

Popular brands