Siemens FC361 Series, Technical Manual

Page: 64 / 151

Function overview
Operating menu overview
7
64 | 151 A6V10421795_en--_k
7.5 Operating menu overview
Main menu Sub menu Description Access
level Sectio
n/Link
1. System status 1 - Alarms Displays current first and last alarm. 1, 2, 3 Section
8.4.1
[➙ 72]
2 - Faults Displays current faults events. 1, 2, 3
3 - Technical Displays current technical messages. 1, 2, 3
4 - Isolations Displays current isolation events. 1, 2, 3
5 - Test Displays current test events. 1, 2, 3
6 - Information Displays current information. 1, 2, 3
2. Operation 1 - Isolation Disables/enables the following:
● Zones and devices.
● All alarm devices
● RT fire and RT fault
● Fire controls
● Control devices
● Door holder devices 2, 3 Section
8.5.1
[➙ 75]
2 - Test
● Sets a zone or device to the Test mode.
● Tests LEDs, buzzers and LCD screen.
● Sets voice alarm devices to the ‘Voice
test’ mode.
2, 3 Section
8.5.2
[➙ 77]
3. Event memory 1 - Event log Queries history events. 2, 3 Section
8.5.3.1
[➙ 81]
2 - Test log Deletes test logs. 3 Section
8.6.1
[➙ 86]
3 - Compensation Value Views compensation values of smoke
detectors OP720, OH720, OOH740,
OOHC740, OP360 and OH360.
2, 3 Section
8.5.3.2
[➙ 83]
4. Login - Logs into a higher access level. 1, 2 Section
8.4.2
[➙ 73]
5. Lamp test - Tests LEDs, buzzers and LCD screen. This
menu is available under access level 1 only if
checkbox 'Lamp test activation possible at
access level 1' is checked under task card
'Other settings' in 'FC360 Panel Configurator'. 1, 2, 3 Section
8.5.2.2
[➙ 79]
6. Engineering 1 -Set date & time Sets system date and time. 3 Section
9.1
[➙ 87]
2 - Edit name / password Edits customer text and changes password. 3 Section
9.2
[➙ 88]
Section
9.3
[➙ 89]
3 - Detector line
● Restarts and powers off a ↑ detector line
● Maintains a detector line, including device
removal, device replacement, test and
read-in.
3 Section
9.4
[➙ 90]