Commissioning
General commissioning steps
10
112 | 151
A6V10421795_en--_k
To modify using 'FC360 Desktop Editor 2.0'
1.
Connect the panel to a PC installed with 'FC360 Desktop Editor 2.0'.
2.
Back up configuration to the PC first. See chapter '
3.
Open 'FC360 Desktop Editor 2.0'.
4.
Select language and click 'Enter'.
5.
Click 'Open an existing configuration'.
6.
Browse to the backup configuration and click 'Open'.
The configuration is open in 'FC360 Desktop Editor 2.0'.
7.
Modify configuration as needed.
Generally the following configuration needs to be modified:
– Customer texts
– Properties and parameters
– Allocation of devices and zones
– Control logics
8.
After finishing modification, click 'Save' to save the modified configuration.
9.
Apply the configuration to the panel by 'FC360 Panel Configurator'. See
chapter '
Applying configurations to the panel [➙ 117]
The panel restarts automatically if the panel is in access level 3.
The configuration finishes.
Detailed information about operation of 'FC360 Panel Configurator' and 'FC360
Desktop Editor 2.0' is available in document
. See chapter
When using the 'FC360 Desktop Editor 2.0' to modify the configuration, don't
change the topology (e.g., add devices to the
detector line(s), or delete devices
from the detector line(s) without uninstalling them from the line(s) first).
Otherwise, you will fail in downloading the configuration to the panel.
Summary of Contents for FC361 Series
Page 6: ......
