Communication
6.4 Communication via PROFIBUS
Control Units CU240S
Operating Instructions, 07/2008 - FW 3.2, A5E00766042B AD
153
3.
Double click onto e.g. "SINAMICS G120 CU240S DP F v3.00". This inserts a fail-safe
G120 inverter as PROFIBUS slave and opens the properties dialog. Assign a PROFIBUS
address and a unique device name or accept the ones, the system offers. Confirm your
settings with OK.
Setting the telegram addresses
Note
The inverters are able to operate with different telegram types. The telegram, selected in the
inverter via P0922, must be identical to the type selected in HW Config.
The addresses can be changed by opening the properties dialog via double click. Set the
addresses to the appropriated values or accept the ones, the system offers and confirm your
settings with OK. The addresses set here must be used in the S7- program for the cyclic
data transfer.