![background image](http://html.mh-extra.com/html/sick/tdc-b100/tdc-b100_operating-instructions-manual_1264311046.webp)
6
COMMISSIONING
46
8021804/2017-11-27|SICK
T R A N S L A T I O N O F T H E O R I G I N A L I N S T R U C T I O N S | Telematic Data Collector
Subject to change without notice
6.5
Adjusting the standard parameters and configuring the interfaces
Parameters can be entered under the two tabs
Settings
and
Telemetry Elements
.
•
The
Settings
tab is mainly used to configure the connection settings and movement
monitoring.
•
The
Telemetry Elements
tab is used to configure the interfaces for peripheral devices
and to process the input signals.
6.5.1
General settings
It is recommended to edit the standard parameters under the
Settings
tab from the top
down.
The parameters are displayed in a tree structure, which offers the user guidance for the
configuration process.
6.5.1.1
General
The
General
section contains information about the TDC device. This makes it easier to
identify and manage each individual TDC device when multiple devices are in use. This is
also where phone numbers are entered for SMS alerts.
Last edited
From the
Last edited
section, it is possible to find out which user was last to edit the
parameters and when. The name of the user logged on to the operating system at the
time of processing is displayed here..
The last time the parameters were edited and the corresponding user are shown for all
of the parameters under the
Settings
tab.
Note