6
COMMISSIONING
64
8021804/2017-11-27|SICK
T R A N S L A T I O N O F T H E O R I G I N A L I N S T R U C T I O N S | Telematic Data Collector
Subject to change without notice
6.5.4
Transferring the configuration to the TDC device
Finally, transfer the device parameters from the configuration software to the TDC device,
thereby permanently saving them on the device.
▸
Select
Parameter
Write to device
in the menu bar.
Once the parameters have been transferred, the TDC device will shut down and start back
up automatically. This might take around 60 seconds.
▸
Use the LED display to ensure proper operation.
6.5.5
Saving the configuration on the PC
You can also save the configured and displayed settings in a configuration file on your PC.
The settings saved within this file can be loaded at a later date (if required) and
transferred to the TDC device.
1. Select the command
Parameter
Write to File
in the menu bar.
2. Select a directory and file name and then confirm your choice.
Select
Parameter
Load from File
to transfer the parameters from the configuration file
to the connected TDC device.
6.5.6
Recording
All actions performed by the TDC device are recorded.
▸
Select
View
Communication
to open the log.
Click on the
Clear
button to delete entries currently in the list.
Note
Note
Note
