7
MONITORING
80
8021804/2017-11-27|SICK
T R A N S L A T I O N O F T H E O R I G I N A L I N S T R U C T I O N S | Telematic Data Collector
Subject to change without notice
3. Enter the period to be analyzed, e.g., the last 24 hours, in the
Period
field under the
Configuration
tab.
Use the table at the bottom to save the value that the sensor should deliver. Click on
the
Edit
button to make an entry. Select the correct operator and enter the value
expected in the
Value
column. In the example here, this value is 24 V.
4. To finish creating your new widget, click on
Save
.
The chart is a way of visualizing the operational readiness of the TDC device over the
past 24 hours, providing a quick way of checking how long the TDC device was without
voltage and was therefore not operational.
