![background image](http://html.mh-extra.com/html/sick/tdc-b100/tdc-b100_operating-instructions-manual_1264311044.webp)
6
COMMISSIONING
44
8021804/2017-11-27|SICK
T R A N S L A T I O N O F T H E O R I G I N A L I N S T R U C T I O N S | Telematic Data Collector
Subject to change without notice
6.4.2
Establishing a connection to the TDC device
Start with establishing a connection to the connected TDC device. To do this, select the
COM port that has been used to connect the TDC device to the configuration PC.
Selecting the COM port in
TDC Configurator
1. Open the
Select communication port
window via
Device
Connect
.
2. Select the COM port that has been used to connect the TDC device to the configuration
PC.
If you are not sure which port has been used to connect to the configuration PC,
open up the device manager on the operating system in order to check the COM port
allocation.
3. Click
OK
to confirm.
Device data
As soon as the connection to the TDC device has been established, the device will appear
in the
Device
box along with details such as its IMEI and firmware version.
The connection status of the device will then be
Connected
.
Note