![background image](http://html.mh-extra.com/html/sick/tdc-b100/tdc-b100_operating-instructions-manual_1264311047.webp)
COMMISSIONING
6
47
8021804/2017-11-27|SICK
Subject to change without notice
T R A N S L A T I O N O F T H E O R I G I N A L I N S T R U C T I O N S | Telematic Data Collector
General
▸
Enter a meaningful name for the device in the
Device name
field (e.g., the installation
location).
▸
A short name for the device can be stored in the
Device identification
field. Do not
select the vehicle registration number as the short name, as these are subject to
change and cannot be used as a way to clearly identify the device.
▸
Enter the phone number of the contact person responsible for the TDC device in the
Admin phone num.
field.
▸
If the
Daily reset enabled
checkbox is checked, the device's memory will be deleted
every day.
Hovering the cursor over an input field will bring up a short description.
Alerting
Up to five phone numbers can be saved in the
Alerting
section. If a real-time alarm is
triggered, the TDC device will send SMS messages to these numbers.
The specific sensors that should trigger an alarm under specific input conditions can be
defined via corresponding telemetry elements (for further information on this, refer to the
next chapter).
Note
Note