![background image](http://html.mh-extra.com/html/sick/tdc-b100/tdc-b100_operating-instructions-manual_1264311007.webp)
ABOUT THESE OPERATING INSTRUCTIONS
1
7
8021804/2017-11-27|SICK
Subject to change without notice
T R A N S L A T I O N O F T H E O R I G I N A L I N S T R U C T I O N S | Telematic Data Collector
1.4
Information depth
These operating instructions contain information about the following topics related to the
profiling system:
•
System description
•
Mounting
•
Electrical installation
•
Commissioning
•
Operation
•
Maintenance and care
•
Fault diagnosis and troubleshooting
•
Technical data and dimensional drawings
When planning and using the gateway system, technical skills are also required that are
not covered by this document.
The official and legal regulations for operating the system must always be complied with.
Further information about the device components used in the gateway system can be
found in the respective operating instructions.
1.5
Abbreviations used
Application programming interface
Access point name = access point of the network operator in the GPRS data network
Controller area network = serial bus system
Global system for mobile communications = technical wireless standard for digital
wireless telephony
General packet radio service = the name given to the packet-based service for
transmitting data within GSM networks
Global positioning system = global satellite navigation system for position determination
Message queue telemetry transport = open messaging protocol for transmitting telemetry
data between devices in the form of messages
Subscriber identity module = chip card for cell phones
Telematic Data Collector = system used to collect and transmit telemetry data
Note
API
APN
CAN bus
GSM
GPRS
GPS
MQTT
SIM
TDC