Instruction Manual
HI 143 T-L
OGGER
WARRANTY
HI 143 loggers and communication interfaces are warranted for two
years
against defects in workmanship and materials when used for their
intended purpose and maintained according to instructions.
This warranty
is limited to repair or replacement free of charge. Damages due to acci-
dent, misuse, tampering or lack of prescribed maintenance are not covered.
If service is required, contact the dealer from whom you purchased the
instrument. If under warranty, report the model number, date of purchase,
serial number and the nature of the failure. If the repair is not covered by
the warranty, you will be notified of the charges incurred. If the instrument
is to be returned to Hanna Instruments, first obtain a Returned Goods
Authorization Number from the Customer Service department and then
send it with shipment costs prepaid. When shipping any instrument, make
sure it is properly packaged for complete protection.
All rights are reserved. Reproduction in whole or in part is prohibited
without the written consent of the copyright owner.
Hanna Instruments reserves the right to modify the design, construction
and appearance of its products without advance notice.
Recommendations for users
Before using these products, make sure that they are entirely suitable for
the environment in which they are used. Operation of these instruments in
residential areas could cause unacceptable interferences to radio and TV
equipments, requiring the operator to take all necessary steps to correct
interferences. Any variation introduced by the user to the supplied equip-
ment may degrade the instruments’ EMC performance. To avoid damages
or burns, do not perform any measurement in microwave ovens.
IST143 12/05
Dear Customer,
Thank you for choosing a HANNA product.
This manual will provide you with all necessary instructions for
correct operation.
If you need additional technical information, do not hesitate
to e-mail us at
.
This instrument is in compliance with the EMC Directive
89/
336/EEC
and Low Voltage Directive
73/23/EEC
for electrical
equipments, and with the
EN 12830
guidelines for tempera-
ture data loggers as follows:
- Suitability: S (Storage), T (Transport)
- Location: C (Food storage and distribution systems)
- Accuracy class: 1
- Measuring range: -30 to 70°C (-22 to 158°F)
Remove the instrument from the packing material and exam-
ine it carefully. If any damage has occurred during shipment,
immediately notify your dealer.
According to the part number, you will receive:
HI 143
T-logger complete with CR2032 lithium bat-
tery, wall cradle, lock and instructions
HI 143-00
T-logger complete with
HI 143001
RS232 com-
munication cradle, Windows
®
compatible
application software, CR2032 lithium battery,
wall cradle, lock and instructions
HI 143-10
T-logger complete with
HI 143002
USB com-
munication cradle, Windows
®
compatible
application software, CR2032 lithium battery,
wall cradle, lock and instructions
HI 143001
RS232 communication cradle complete with
Windows
®
compatible application software
HI 143002
USB communication cradle complete with Win-
dows
®
compatible application software
Note:
Conserve all packing material until the instrument has
been observed to function correctly because any defec-
tive item must be returned to the Dealer in its original
packing.
GENERAL DESCRIPTION
HI 143
is a temperature data logger with internal NTC
sensor. The user interacts with the logger, programming the
device or downloading logged data, through a serial or USB
port on a PC. The Windows
®
compatible application software
supports the communication between the logger and the PC
through a transmitter (
HI 143001
with RS232 or
HI 143002
with USB connector).
The main features of the
HI 143
thermologger include:
• Logging start through PC, button pressed or at set time
• Selectable sampling interval, from 1 minute to 24 hours
• Up to 4000 logged samples
• Selectable measure unit, °C or °F
• Min/max measured values are stored and displayed
• Programmable high and low alarms
• Non-volatile storage of logging parameters and data
• Battery level indicator on display
• Security password
• IP 65 protection
w w w . h a n n a i n s t . c o m
PRELIMINARY EXAMINATION
SPECIFICATIONS
LCD FUNCTIONAL DESCRIPTION
1. “WAIT TO LOG”: Waiting to start logging
2. “LOG”: Logging in progress
3. “LOG DONE”: Logging completed
4. High and Low alarm values
5. Measure unit
6. Start by pressing the logger button
7. Battery level indicator
8. Maximum and Minimum logged values
Range
-30.0 to 70.0ºC / -22.0 to 158.0ºF
Resolution
0.1°C / 0.1°F
Accuracy
±0.4°C (-20 to 60°C); ±0.6°C (outside)
±0.7°F (-4 to 140°F); ±1.1°F (outside)
Typical EMC Dev.
±0.3°C / ±0.5°F
Calibration
Factory calibrated
Data Logging
Up to 4000 samples
Logging Interval
User selectable,
from 1 minute to 24 hours
Battery Type
1 x CR2032 3V lithium battery
Battery Life
2 years
Protection
IP 65 (watertight)
Dimensions
60 x 37 x 17 mm (2.4 x 1.5 x 0.7’’)
