background image

1

(15190) PreLOG   

          Operating Instructions 

Operating Instructions
Data Logger PreLOG (15190)

Features

PreLOG / PreLOG ECO

Memory for up to 65536 measured values

• 

Saves pulses / sums of precipitation with timestamp

• 

Resolution con

fi

 gurable (standard: 0.1 mm)

• 

Event-driven recording (no zero values)

• 

Integrated debouncing of the reed contact

• 

Intensity-dependent correction of precipitation sums

• 

Data retrieval via USB

• 

Real-time clock

• 

Power supply by rechargeable Li-ion battery for 3-5 years (depending on the precipitation intensity and without 

• 

a modem)
Recharging of the battery via USB port

• 

Housing IP65 (plugged-in connector: IP67)

• 

PreLOG

Pulse output (not corrected, debounced)

• 

Optional external power supply e. g. via solar set

• 

RS232 interface for data retrieval and connection to a modem (optional)

• 

Optional data transmission via GPRS modem to a appropriate MeteoWare host with static IP address

• 

Event-driven alarm function via connectable modem

• 

Start / End Precipitation

 

Exceeding of a de

fi

 ned max. amount of precipitation since the last retrieval / alarm

 

Exceeding of a de

fi

 ned max. amount of precipitation as a moving sum over a de

fi

 ned time frame (with 

 

hysteresis)
Exceeding of a de

fi

 ned max. precipitation intensity (with hysteresis)

 

Summary of Contents for 15190































Reviews: