background image

HOBO® RX3003 Station Quick Start (RX3003-SYS-KIT-80x)

21376-A MAN-RX3003-SYS-KIT 

RX3000 Station Key Components 

 

1

 

Log in to HOBOlink.

Go to www.hobolink.com and log in to an existing 
account or create a new one. You’ll receive an email to 
activate the new account. 

2

 

Register the station.

In HOBOlink, click Devices and then click the Register a 
Device link. Give the station a name and enter the serial 
number and device key from the label inside the station 
door. 

3

 

Plug in the battery and charging device.

Connect the battery port connector followed by the 
appropriate charging port connector. Once the battery 
cable is plugged in, “Initializing System” will flash on the 
LCD. A checkmark appears next to “System” after the 
system initialization is complete. 

Tip:

 Refer to the RX3000 manual for instructions on 

wire routing and environmental sealing of wires. 

Check or configure device communications.

The station will automatically connect to HOBOlink after 
powering up the station. Make sure a checkmark 
appears next to Last Connection. If not, press the 
Connect button and wait for the station to connect to 
HOBOlink. 

5

 

Plug in and search for smart sensors.

a. Plug in smart sensors into the connectors in the

bottom of the case. 

Tip:

 Refer to the RX3000 manual for instructions on 

wire routing and environmental sealing of wires. 

b. Press the Select button to view the smart sensors on

the LCD and then press the Search button (the
magnifying glass icon should be visible as in the
example below). The station will search for all
connected smart sensors and show the number of
channels after a few seconds. Note that some smart
sensors have multiple channels (such as the
temperature/RH sensors). 

Connect to HOBOlink.

Use the Select button to return to the main LCD screen 
that shows all sensors and modules and then press the 
Connect button (the cloud icon should be visible as 
shown in the example). This is necessary for HOBOlink to 
identify the newly added sensors. 

A checkmark appears 
next to Last Connection 
after connecting to 
HOBOlink 

Battery port, cable connected 

Charging port 

Slots for 
optional  
user-installed 
modules 

USB port 

LCD 

Connect/
Search 
button

Select 
button 

Start/ 
Stop 
button 

Press the Select button to view 
the smart sensor channels 

Press the Search button for the station 
to identify connected smart sensors 

Press the Connect button

Press the Select button to 
return to the main LCD screen 

Connect button 

Reviews: