Sharp IQ-8900 Page 99 Operation Manual Download

Page: 99 / 322

Deleting all entries

All

Schedule

entries can be deleted at one time using the

application menu.

Press

and then touch

in the Index or

View mode.

Select DATA DELETION.

A submenu appears.

Select ALL SCHEDULE DATA.

A warning message will appear asking if you are sure you
want to delete all the entries in the application.

Touch

(or

to cancel the deletion).

It is not possible to delete all entries simultaneously if the

unit is locked. See p. 282.

Deletion of entries over a specific period

You can delete all

Schedule

entries for a period of a

month, a week, or a single day through the

Calendar

application.

Press

and select the date which falls in the

period you want to delete all

Schedule

entries in.

Press

touch

and select DATA

DELETION.

A submenu appears.

[SELECTED MONTH

Summary of Contents for IQ-8900



































































































































































































































































































































Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands

Sharp IQ-8900, Operation Manual

Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands