manualshive.com logo in svg

Sharp IQ-8900, Operation Manual

Share
Download
Sharp IQ-8900 Operation Manual Download Page 156

View page layout

If you are working with a full-size page, and you want to

check that text is formatting properly on the page, you
can do so using PAGE LAYOUT in the application menu.
While this function does not allow you to read the entered

text, it does show you the full page at one time.

 In the View or Edit mode, press 

 , touch 

and select PAGE LAYOUT.

Current page/total number of pages

2. If you are working with a document several pages long,

you can view different pages by pressing  o

r

(NEXT).

3. Touch 

 to return to the normal display.

Selecting the paper size and font type for printing

When you have an entry that you want to print, you need
to select the size of paper and the font that you want to
use to print the entry (on a printer connected to the unit).
These selections are made through the 

Notebook

application menu.

1. 

In the Edit mode, press (MENU) , touch 

 and

select SET PAGE FORMATS.

155

Summary of Contents for IQ-8900



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands