Sharp IQ-8900 Page 117 Operation Manual Download

Page: 117 / 322

recommended to use the category list so the changes will
be reflected in all entries that category is assigned to.

You can edit a category at any time in the

To Do

application.

1. Press (MENU), touch

and select

CATEGORIES.

2. Select the category you want to edit.

Press [EDIT).

If the category is currently being used in an entry, a
message asks if you want to edit it anyway. Touch

to proceed.
An EDIT CATEGORY window opens.

4. Make any desired changes.

5. Touch

The new, edited category is now stored in the list, and the

changes are reflected in all entries the category is
assigned to.

If you edit a category in an entry, it is registered in the

category list as a new category.

Deleting categories

When you find a category that is not needed any more,

after project completion for example, you may want to

delete the category from the category list.
A category cannot be deleted if it is being used by an
entry.

1. Press

, touch (MODIFY], and select

CATEGORIES.

2. Select the category you want to delete.

Press

A warning message will appear asking if you are sure you
want to delete the category.

4. Touch

(or

to cancel the deletion).

116

Summary of Contents for IQ-8900



































































































































































































































































































































Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands

Sharp IQ-8900, Operation Manual

Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands