Sharp IQ-8900 Page 242 Operation Manual Download

Page: 242 / 322

Sharing data
with another
unit

When you restore data from a RAM card, any existing

information in the unit will be lost.

Data and entries can be transferred easily and quickly

between

Series units simply by swapping a

RAM card between them. You can receive data from

7000 and 8000 Series models (you cannot, however,

move data from your unit to these models), and then

work with that data, but it must first be converted into the
format used on your unit.

Applications may not match on different unit models.

Entries can only be transferred if there is a matching

application on the receiving unit.

Memo entries from the 7000 and 8000 Series
Organizers will be transferred to the

Notebook,

and

Business Card entries from the 8000 Series will be

transferred to USER FILE 1 in the

User File

application. All other matching applications will share

the same name.

A RAM card used with a password in a 7000 or 8000
Series Organizer cannot be used with this unit. You

must first delete the password from the card in the
other unit.

There are a few other restrictions for receiving

Series data via a RAM card. These are the

same as for receiving data directly from a
Series Organizer. See p. 274.

To use data from

Series Organizers:

Turn the unit off and install the RAM card that has

Series data stored on it.

Turn on the unit.

A message appears.

The format of the RAM card

different from that of the main unit.

you want to access the data on

it:

1) Select

Application (i.e.

2) Press [MENU] then [PERIPHERALS].

3) Select IMPORT OTHER FORMAT.

4) Select VIA

RAM CARD.

241

Summary of Contents for IQ-8900



































































































































































































































































































































Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands

Sharp IQ-8900, Operation Manual

Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands