Sharp IQ-8900 Operation Manual Download

Page: 210 / 322

Copying or Moving Entries

The CUT/COPY/PASTE function provides a quick,
convenient way for you to copy or move an entire entry to

another location. Entries do not have to be in the same

file or even in the same application-CUT/COPY/PASTE
works across virtually all applications including those on a

RAM card. Graphic entries, however, can be copied or
moved only within the

Scrapbook

or to a picture field in a

Tel

User File

entry, or to the start-up display.

Display an entry that you want to copy or move in the
View mode, or select it in the Index mode.

Press (2nd)

if you want to move the entry. A

message will ask if you are sure you want to delete the

entry from its present location. Touch

to proceed

(or

to cancel the operation).

Press

if you want to make a copy of the

entry.

Press

in the application you want to move or

copy the entry to. You can also append the copied/cut
entry to an existing entry. Open an entry in the Edit

mode, and move the cursor to the position where you

want to append the entry.

Press (2nd)

Make any necessary changes to the moved/copied entry.

Touch

when you have finished to store the

entry.

The entry you selected is now moved or copied to the

new location.

In the View mode in the

Outline

application, to copy or

move an entire outline, you must first select its title.
If you select a topic in the outline, only the selected

topic and its subtopics will be copied.

Scrapbook

entries can only be pasted within the
aoolication or into the picture field of a

Tel

209

Summary of Contents for IQ-8900



































































































































































































































































































































Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands

Sharp IQ-8900, Operation Manual

Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands