Sharp IQ-8900 Operation Manual Download Page 164

Page: 164 / 322

is displayed to indicate the insertion position.

3. Move to the desired location using

and

4. Type in the new topic.

5. Touch

Press

at any time before touching

to cancel the insertion.

You can also add a topic between existing topics by first

selecting the topic after which you want to insert the new
topic, then simply starting to type the new topic.

Moving topics

Even after you have stored a topic, you can change its
location easily.

In the View mode, select the topic you want to move.

2. Press

(the second row from the top on the

keyboard).

The entire topic is momentarily highlighted, then replaced

3. Move

to the new location using

and

Press (ENTER).

reverts back to the full contents of the topic.

Press

at any time before pressing

cancel the move.

Topics cannot be moved to a position above the title.

Joining two topics into one

You can join (merge) any two consecutive topics into one

using the application menu. A selected topic is joined to

the topic above it.

In the View mode, select the topic you want to join to the

one above it.

163

Summary of Contents for IQ-8900



































































































































































































































































































































Search results

Summary of Contents for IQ-8900

Reviews:

Brands by name

Popular brands

Sharp IQ-8900, Operation Manual

Search results

Summary of Contents for IQ-8900

Reviews:

Brands by name

Popular brands