Sharp IQ-8900 Page 79 Operation Manual Download

Page: 79 / 322

thin, thick, or “brush” drawing

a thin or thick eraser.

Selects a black, gray, or white line

pattern (white is equivalent to an

* USE PEN

USE ERASER

USE AREA TOOLS [A]

DELETION

eraser).

Sets drawn lines to

or freestyle (ruler off).

Default drawing setting.

it (ruler on)

indicates that there is a

submenu for the menu
items.

L-Converts the touch pen to an eraser.

Marks areas to cut, copy, paste or
delete.

Deletes a selected area, single entry,

or all Scrapbook entries.

After storing an entry, or pressing

recall a stored entry to the blank page, the display

changes to a “viewing page.” Existing graphic entries are
viewed on this page.

Making

new
graphic
entries

Press

(SCR

PBOOK]

to open the application.

A “blank page” appears on the display.

2. Start drawing anywhere in the drawing area with the

touch pen.

3. Write the letter A and draw a circle around it.

Press

The drawing is now stored.

If you make a mistake while drawing, you can clear it any

time before it is stored by pressing

Summary of Contents for IQ-8900



































































































































































































































































































































Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands

Sharp IQ-8900, Operation Manual

Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands