Sharp IQ-8900 Page 89 Operation Manual Download

Page: 89 / 322

Displays current

month if not already
displayed.

Changes to the
Monthly view.

Selected month

Press

to see the previous or next set

of three months, respectively.

You can display a Monthly view by touching the selected

month.

The Weekly

The Weekly view shows the schedule over a one-week

view

period. To open the Weekly view, select a date in the
Daily or Monthly view and touch

Selects and displays

Change to other

today’s date.

views.

Temporarily hides (or
reveals) all

Schedule

and

Ann

entries from

the view (see p.

108).

Selected date

Press

to display the preceding or

following weeks, respectively.

You can also go to a Daily view by touching the required
date twice.

The Weekly

The Weekly Graph view shows

Schedule

entries over a

Graph view

one-week period, helping you avoid conflicting

appointments and letting you check your free time at a

Summary of Contents for IQ-8900



































































































































































































































































































































Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands

Sharp IQ-8900, Operation Manual

Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands