Sharp IQ-8900 Operation Manual Download Page 179

Page: 179 / 322

4. Enter the ending date.

5. Touch

The number of days between the two dates is shown.

if you make a mistake, touch

to return to a

previous step.

If you

invalid date or other value, for example

if you forget to enter the year, the operation will not be

nized and nothing will happen when you touch

Calculating a date by specifying a number of days

Touch

to call the date calculator.

The current date is the default starting date. If you want
to calculate a date from the current date, skip the next
step.

2. Touch

to clear the starting date field and enter

the desired starting date. Prefix a single-digit month or

date with a 0.

You can also modify a specific part of a date by touching

it, then entering the desired numbers.

3. Touch

to obtain a date in the future, or

for a date in the past.

Touch

, respectively.

4. Enter the number of days to base your calculation on.

5. Touch

The date is displayed.

178

Summary of Contents for IQ-8900



































































































































































































































































































































Search results

Summary of Contents for IQ-8900

Reviews:

Brands by name

Popular brands

Sharp IQ-8900, Operation Manual

Search results

Summary of Contents for IQ-8900

Reviews:

Brands by name

Popular brands