Sharp IQ-8900 Operation Manual Download Page 170

Page: 170 / 322

difficult to manage. The collapse function allows you to
condense the view and later expand only those topics
and families that you need to see.

It hides all subtopics from view, displaying only first-level

topics and the title.

1. Display the outline in the View mode.

2. Press

touch

and select COLLAPSE

ALL.

All subtopics are collapsed into their topics and
eliminated from the display.

Corp's Branches

If you want to collapse only one specific family, select its
parent topic and then press

or touch for the

topic.

All subtopics belonging to that topic will be hidden

from view.

Expanding families

All subtopics that have been collapsed in a family or in

the entire outline can be expanded.

1. Display the collapsed outline in the View mode.

2. Select the topic you want to expand, or the title if you

want to expand the entire outline.

3. Press

, touch

and select EXPAND

FAMILY.

All subtopics of the selected topic are displayed to the
furthest level beneath the topic.

169

Summary of Contents for IQ-8900



































































































































































































































































































































Search results

Summary of Contents for IQ-8900

Reviews:

Brands by name

Popular brands

Sharp IQ-8900, Operation Manual

Search results

Summary of Contents for IQ-8900

Reviews:

Brands by name

Popular brands