Sharp IQ-8900 Operation Manual Download

Page: 215 / 322

Turning
the Filter

all the display modes of an application until the

function

turned off.
You can edit or view the displayed entries normally while
the

Filter

is turned on.

The

Filter

function is available only in the

Schedule, Tel,

and

User File

applications.

Open the application-Schedule,

Tel,

User

File-containing the entries you want to work with. Go to

the Index or View mode.

Press

touch

and select FILTER

ON/OFF.
A submenu appears.

Select TURN ON FILTER.

In the

Tel

and

User File

applications, a display similar

to the Edit mode opens.

In the

Schedule

application,

below.

a window opens as shown

Touch the SECRET ONLY box to extract secret entries
only (see p. 282). (This box will not be displayed if the
unit is locked.) You can extract all the secret entries in
the application by skipping step 5 below.

(Touch the button again to deselect the feature.)

214

Summary of Contents for IQ-8900



































































































































































































































































































































Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands

Sharp IQ-8900, Operation Manual

Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands