manualshive.com logo in svg

Sharp IQ-8900, Operation Manual

Share
Download
Sharp IQ-8900 Operation Manual Download Page 167

4. Touch 

 (or 

 to cancel the deletion).

You can also delete a selected topic (family) by pressing

 in step 2 above.

If you select a topic for deletion, all the subtopics (see p.

167) below it will also be deleted. You may want to

rearrange an outline beforehand to prevent this (see p.

169).

Deleting an outline

1. 

Select the outline you want to delete in the Index mode or

display it in the View mode.

2. Press 

 , touch 

 and select DATA

DELETION.

A submenu appears.

3. Select SELECTED OUTLINE.

A warning message appears asking if you are sure you
want to delete the outline.

4. Touch 

 (or 

 to cancel the deletion).

You can also delete an outline by pressing 

 in step

2 above. To do this in the View mode, the title must be

selected.

Deleting all outlines

1. 

In the Index or View mode press 

 , touch

 and select DATA DELETION.

A submenu appears.

 Select ALL OUTLINES.

A warning message appears asking if you are sure you
want to delete all outlines in the application.

3. Touch 

 (or 

 to cancel the deletion).

It is not possible to delete all outlines simultaneously if

the unit is locked. See p. 282.

166

Summary of Contents for IQ-8900



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands