Sharp IQ-8900 Page 275 Operation Manual Download

Page: 275 / 322

Points to Remember When Using Peripherals

When using IC cards formatted for units other than

Series:

Cards that are 3.4 mm thick, such as the

and

application cards of the

format, cannot

be used with this unit. Forcing these cards into the
unit may cause damage.

The

and IQ-8802 cards cannot be

used with this unit.

The following keys on this unit cannot be used (refer to

the card operation manual as regards the other

keys):

(SEND)

RINT

SCREEN)

(CUT) (MENU)

The

key mentioned in IC card operation

manuals is re resented b the

key on this unit.

Also, the

key operation is

performed by

the

then touching

and

operation by pressing (2nd)

The displays for these operations might be

different from those in the card manuals.

To transfer data from a card, first select card memory,

To transfer data from the unit,

touch PERIPHERALS after

selecting any application on the unit. To use the
Memory Check or Data Deletion functions with a card,
first select card memory then press

You cannot move the cursor by touching the IC card
window and you cannot highlight text in it by dragging.

Use the cursor keys to move the cursor.

When using the

IQ-71 1 B,

you can enter data in the

clipboard by pressing

However, you

cannot enter data in the clipboard if the amount of free

memory is small.

The following cards can be used in conjunction with

most of the unit’s built-in applications. Press

to access these dictionaries while using a

274

Summary of Contents for IQ-8900



































































































































































































































































































































Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands

Sharp IQ-8900, Operation Manual

Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands