Sharp IQ-8900 Operation Manual Download

Page: 181 / 322

From

to entry

After a calculation, touch the value displayed in the

window to highlight it, and press (2nd)

2. Open an entry in the Edit mode of an application and

touch the position where you want to enter the calculated
figure.

3. Press (2nd) (PASTE).

Now the copied value is included in the entry.

When E
appears

When any of the following situations occur? the error

indicator E appears. Touch

to clear the error.

The integer part of the calculation result is within the

range of 11 to 20 digits (a rough calculation is obtained).

Example: 4567890123

456

“208.2957896” is displayed with E, which
indicates that
208.2957896 x

is the rough result.

In the paperless printer mode, no rough calculation can

be obtained.

The integer part of the calculation result exceeds 20

digits.

The integer part of the numerical value in the memory

exceeds digits.

A number is divided by 0.

180

Summary of Contents for IQ-8900



































































































































































































































































































































Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands

Sharp IQ-8900, Operation Manual

Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands