manualshive.com logo in svg

Sharp IQ-8900, Operation Manual

Share
Download
Sharp IQ-8900 Operation Manual Download Page 180

You can continue to calculate dates in the future or past

using the calculated date as a new starting date; after a
date is calculated, touch 

 or 

 , respectively. The

calculated date is automatically entered in the FROM
field. Proceed from step 4 above.

If you make a mistake, touch  

  to return to a

previous step.

Using the

You can perform calculations that are written out in an

Calculator

entry of any application using the 

 application. You

with other

can also transfer calculated values into an entry.

applications

From an entry to 

1. 

Press the application key for the entry with the data you

want to calculate.

2. Highlight the calculation you want to perform.

PAGE   1

3. 

Press (2nd) 

4.

The copied calculation is performed automatically, and
the result is displayed.

179

Summary of Contents for IQ-8900



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands